Punisher Horn MKII

Frequency: 50 to 200Hz

Enclosure Type: Horn

Size: 700x500x810mm

Recommended Driver: pw332(12.00sw)

Plan: Punisher-MK2

alt

Settings: 2x Punisher/1x X-tro

Processor settings All filters 24db/oct Linkwitz/Riley s

Sub hp: 40,5 hz (For a single cabinet a side 45Hz can be used) lp: 91,0 hz

low hp: 99,2 hz lp: 297 hz

mid hp: 315 hz lp: 2,38 khz

high hp: 2,45 khz

Delay

sub 0

low 5,99 ft 1,82 mtr 5,31 msec

mid 6,81 ft 2,07 mtr 6,04 msec

high 7,21 ft 2,19 mtr 6,40 msec

EQ:

sub1 40-50Hz (depending on number of cabinets) gain: personal taste Q = 3-4

low 105 hz -1,0 db Q = 4,410

mid 2,25 khz + 4,0 db Q = 1,215

high 14,3 khz +1,0 db Q = 1,789

Website: http://www.speakerstore.nl/index.php?l=en&pg=11&c=21

Designers: Walt and Frederik from www.speakerstore.nl

Posts in discussion: Punisher HORN II

inting replied the topic:

#22852

9 years 4 months ago

i hope..i build this one..

Lime replied the topic:

#22684

9 years 7 months ago

i'm not authorized for download..
is there anything to do?

giveortake replied the topic:

#22665

9 years 7 months ago

I have now edited the first post. It redirects to the correct page:
freespeakerplans.com/plans/14-plans/basscab/45-punisher-mk2

Let me know if you encounter any issue.

arneblommaert replied the topic:

#22664

9 years 7 months ago

Plan is not available for download..

N.Dougal21 replied the topic:

#21585

10 years 7 months ago

can anyone tell me how many sheets per cab these take to build?

MAutopsy replied the topic:

#7999

14 years 8 months ago

Thanks bitzo- I gave myself a crash course in HornResp last night. Good stuff i have a much better understanding of it now.

bitzo replied the topic:

#7990

14 years 8 months ago

cms rms mmd can be calculated by HR, double click on each field, HR ask mms vas and fs to get this value.

However this sim is not so accurate. Divide the horn in 5 section.

cheers, bitzo

MAutopsy replied the topic:

#7976

14 years 8 months ago

Need some help, trying to figure out HR (V 26.20) and i am getting this error.
Got the Cab inputs from a speakerplans forum bitzo pointed me to and my driver specs are as follows:
Radian 2312
Resonant Frequency (Fs) 56 Hz
Impedance (Re) 5.3 ohms
Total Q (Qts) .214
Mechanical Q (Qms) 1.94
Electrical Factor(Qes) .241
Comp. Equivelant Vol. (Vas) 46.64 Liters / 1.65 cu. ft.
Voice Coil Overhang (Xmax) 3.66
BL Factor 23.1 T-M
Reference Efficiency (%) 3.3%
Surface Area of Cone (Sd)m2 .053 m2- 530 cm^2

I know that this probably wont come out right, as this isnt the right driver. I just would like to know what the error is and how i get the value.

giveortake replied the topic:

#7534

14 years 9 months ago

Fixing the links now...

[attachment=1:22mv232n]060_P-II.zip[/attachment:22mv232n]
[attachment=0:22mv232n]060_Plans.zip[/attachment:22mv232n]

bee replied the topic:

#7533

14 years 9 months ago

hope these help....

replied the topic:

#7531

14 years 9 months ago

im lookin for plan to build the punisher......the cad files arent ther nemore.....it will b much appreciated if sum1 send me a link to the plans

thankz kevin

Punisher Horn MKII

Discuss this article