TDA's 4x10 bass horn v2-Simmed

Looks very interesting, was wondering if anyone has built or heard this.
photofile.ru/users/tda-audio/182333/30379334/
Google translate works if you cant read russian

i woul like what is the driver in he box and if one men was make simu of this i'm interressing

drawing isn't that good, a lot of it don't come together
but this is what I came up with roughly

S1 988
S2 4400
Exp 113
Vrc 44
Lrc 25
Vtc 2000
Atc 1400
driver 4p

thanks mike! did you get the email with the Mule?

yes, thanks

[attachment=0:7lqjn8c9]<!-- ia0 -->tda410sim.JPG<!-- ia0 -->[/attachment:7lqjn8c9]
2pi 4 drivers 1 cab

Used this driver to sim because Bill Fitzmaurice says you can use it in one of his tuba builds.
cant determine if xmax is a cumulative total on hornresp (all Drivers) or for each individual driver. This is confusing as the schematic shows one big driver. Any help on that would be great.

xmax shown will be as one driver
.....meaning, if it says 6mm for xmax limit, and the drivers xmax limit is 6mm, you're ok

so look at all 4 drivers as 1, one piston

in my opinion, the horn length is not long enough, and would be better tuning the rear chamber to a hybrid horn

otherwise it's a heavy kick cab

MAutopsy wrote: [attachment=0:2axsxi5z]<!-- ia0 -->tda410sim.JPG<!-- ia0 -->[/attachment:2axsxi5z]
2pi 4 drivers 1 cab

Used this driver to sim because Bill Fitzmaurice says you can use it in one of his tuba builds.
cant determine if xmax is a cumulative total on hornresp (all Drivers) or for each individual driver. This is confusing as the schematic shows one big driver. Any help on that would be great.

you need to use series parallel or use x 4 parallel at 2 ohm

i messed around and changed it to a ported horn. a little less excursion.

the driver i simmed has an xmax of 4mm, not much. but the sim didnt go higher than 16mm at 300 watts, is this right or does the program not work like that.

Also, the S2010 (the simmed one) is a neo driver, and that could make the cab real light smiley20