Submitting a modified plan

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 10 months ago #23692 by tkroeker
Submitting a modified plan was created by tkroeker
I am half done with a MT130 and have made modifications.

Most are cosmetic and the horn is changed a bit more. What is the process for submitting "my" design or "suggested Modification" to the original designers plan ?

The attached sketch is a rough prelim design and I will be making wood horns for jbl 2445s

the pic is about where I'm at. The main "cosmetics" is that I have removed the side panels for the see through effect.
Attachments:
The following user(s) said Thank You: giveortake

Please Log in or Create an account to join the conversation.

More
7 years 10 months ago #23695 by giveortake
Replied by giveortake on topic Submitting a modified plan
Hello tkroeker,
Thank you for asking, this site is all about its members and how we can help the community. We highly welcome plans submissions, you can reach out to us directly at admin@freespeakerplans.com and we will help you from there.
Thank you for your interest in FSP !!!

What is your philosophy of life or your creed ?
\"Have a good time, ALL THE TIME\"

Wisdom is better than silver and gold !

Please Log in or Create an account to join the conversation.

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 10 months ago #23699 by tkroeker
Replied by tkroeker on topic Submitting a modified plan
Thanks, will do.

Please Log in or Create an account to join the conversation.

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 8 months ago - 7 years 8 months ago #23820 by tkroeker
Replied by tkroeker on topic Submitting a modified plan
update. Keep in mind this is the prototype so I have not been to precise on things like nail aim LOLOL :woohoo:
Last edit: 7 years 8 months ago by tkroeker.

Please Log in or Create an account to join the conversation.

  • tkroeker
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
7 years 8 months ago #23842 by tkroeker
Replied by tkroeker on topic Submitting a modified plan
So the Cabinet concept was to take the trapezoid sides off to give it more of a stylish see through effect.
The plan calls for flying hardware so the side support isn't that important.

The horn is a 2"compression from 600 or 800 up
The 12 will do 200 to 6 or 800
there will be two cabinets on each side " inverted" so the drivers will couple.

below will be HD 15's for low and 18's for subs

The horn guide is a cross between a JBL 2355 and 2380 and has a custom made 2328 conversion throat
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.434 seconds
Powered by Kunena Forum