- Posts: 10
- Thank you received: 0
PD.2150 vs PDN.2151 graph thoughts?
- Nocturnal92
-
Topic Author
- Offline
- New Member
-
Less
More
8 years 1 month ago #23443
by Nocturnal92
PD.2150 vs PDN.2151 graph thoughts? was created by Nocturnal92
Im building a soundsystem designed to be compact, impactful, with exellent sound quality and bass extension down to 30hz. I intend to use this system for high sound quality and deep bass for smaller crowds, rather than being mainly concerned with getting the highest volume levels possible out of the drivers for bigger ones.
With all this considered the sub cabients im going to build are the Cubo Subs (tapped horn / bandpass hybrid believe) with 21 inch drivers (4 in total). They can go down to 30hz, are compact, and although they may not give the same volume levels as say the Hog Scoop 18s that is not my main concern, they are also the only subs i have space to store.
I was originally gonna use the PDN.2151s but after comparing the graphs to the PD.2150s im not too sure. Heres the graphs:
PDN.2151:
PD.2150:
As you can see the PDN seems to roll off and have lower output around 30hz, should i be corncerned about this given my goals for the system? The PDs are cheaper too but weigh more than the moon, wondering if the graph differences are enough to justify getting the 2150s, or going for the much lighter but more expensive PDNs.
As far as im aware PD subs are highly regarded but are they any other 21 inch drivers that are all round better?
Here is a link to both drivers i meationed with all specs:
www.precision-devices.com/Product-Details/PD2150
www.precision-devices.com/Product-Details/PDN2151
With all this considered the sub cabients im going to build are the Cubo Subs (tapped horn / bandpass hybrid believe) with 21 inch drivers (4 in total). They can go down to 30hz, are compact, and although they may not give the same volume levels as say the Hog Scoop 18s that is not my main concern, they are also the only subs i have space to store.
I was originally gonna use the PDN.2151s but after comparing the graphs to the PD.2150s im not too sure. Heres the graphs:
PDN.2151:
PD.2150:
As you can see the PDN seems to roll off and have lower output around 30hz, should i be corncerned about this given my goals for the system? The PDs are cheaper too but weigh more than the moon, wondering if the graph differences are enough to justify getting the 2150s, or going for the much lighter but more expensive PDNs.
As far as im aware PD subs are highly regarded but are they any other 21 inch drivers that are all round better?
Here is a link to both drivers i meationed with all specs:
www.precision-devices.com/Product-Details/PD2150
www.precision-devices.com/Product-Details/PDN2151
Please Log in or Create an account to join the conversation.
Time to create page: 0.176 seconds