X-TRO

Use this thread to discuss the X-TRO design posted here .

I think could be useful the input data for hornresp of this cab. so here's

Bass section
s1=1350
con=22.5
s2=906.5
con=23.5
s3=1912
vrc=42
lrc=20
atc=3300
vtc=6393

pay attention to these tips
-subtract cone volume and magnet volume of 2 driver from vrc
-add cone volume of 2 driver to vtc
-put 2 driver in the driver arrangement menu
-in the spl screen, tools menu,directivity, reponse put 69 degree

midsection
s1=144
con=25
s2=1175
vrc=4.46
lrc=10
vtc=216
atc=550

pay attention to these tips
-subtract cone volume and magnet volume of driver from vrc
-add cone volume of 2 driver to vtc
-in the spl screen, tools menu,directivity, reponse put 0 degree

Any chance of getting the plans in inches?

divide all the quotes by 2,54 you get the inches.
divided all the quotes by 2,54 , get the integer value and now substract it to the quote divided by 2,54. now convert this value in your crazy imperial fraction.

A pretty stupid question but...a don't realise it since now...where's the 8" mid horn access pannel ?

on the 2 i built i put the panel on the top of the box, not alot of room to load...... drop in the driver then bolt in.

Pictures of Xtro build.

A little bowl making with the baffle cut outs stuck together.









Finishing and loading.















They are loaded with B&C -
15" = 15NW76
8" = 8PE21
Compression = DE500 On TD245 Horn.

good work fella, lovin ya work shop, propa tidy.... smiley20

Is it possible to make this cab with only 1 15" driver to make cab shorter?