MT-130

Use this thread to discuss the MT-130 design posted here

hi if i use paudio SN-12B will it have a good response

with any cab it is best to use the drivers that the cab was designed for.

ok thanks

can ya pls send some pic.....,djsync@in.com

anyone made one of these?

Hi guys, old member from speakerplans.

Are these MT 130 cabs similar to the MT121?

I've drawn the 130's up in CAD as per the spec but there seems to be dimensions missing for the section of wood which sits behind the speaker in the top section. The drawing shows the the height of the wood is 299mm but the distance from the front of the cab to where the piece of wood is fixed is not specified, does anyone know what it should be?

Cheers smiley1

[attachment=0:441dp6b9]<!-- ia0 -->MT 130.jpg<!-- ia0 -->[/attachment:441dp6b9]

Anyone?

if you mean for the hf horn then it does not rearly matter... too much, put it as close to the horn as possible but not touching.....

bee wrote: if you mean for the hf horn then it does not rearly matter... too much, put it as close to the horn as possible but not touching.....

It is irrelevant, the chamber size is of no matter.