- Posts: 11
- Thank you received: 0
Cubo 15
- rob.parkinson
-
- Offline
- New Member
-
also i don't suppose anyone could recommend some plans for some tops to go with a pair of these babies??
cheers
rob.p
Please Log in or Create an account to join the conversation.
- CORTas
-
- Offline
- New Member
-
- Posts: 7
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- COZY PILLOW
-
- Offline
- Premium Member
-
- Posts: 141
- Thank you received: 2
I built 2 Cubo 18 cabs with with DeltaPro18A's and they are amazing. I also built 2 Cubo 15 cabs with Kappa 15LFA's and they are also amazing. There is a very slight difference in SPL between the 18's and the 15's but, it really is not that noticeable. Both these cabs have an unbelievable throw and sound quality compared to standard reflex cabs.
You won't be disappointed!!!!!!!!! smiley20 smiley20 smiley20
Please Log in or Create an account to join the conversation.
- CORTas
-
- Offline
- New Member
-
- Posts: 7
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- Cubo15
-
- Offline
- Platinum Member
-
- Posts: 916
- Thank you received: 131
They’re both equipped with a 3” VC, almost same gap depth, similar Fs/Qts/Vas. I fit comes to displacing air my money is on the 3015LF, but apperently it lost some power handling capabilities in the proces. Eminence keeps power compression number hidden, so it’s a hard guess. I reccon they’re about even as long as they’re not getting much above 800-900 Watts program. The 3015LF might handles ome more RQ though, or a lower HP.the 3015lf or the 15lf
What do you think of the speaker RCF S800? Nice speaker. Not the cutting edge but an definate upgrade looked upon from the Kappa 15LF. Needs a 40 Hz HP at 24 dB/octave in my opinion though.
If money is a real issue I reccon the Delta’s will work fine. If however, we’re talking about working that one extra day, to afford the Kappa 15LF’s I would think twice;)what do you recon to using eminence Delta 15A LFs instead of the kappas? (money is an issue but if its gona make a big difference ill go with the kappas)
Loads of plans that do a solid 80-90 Hz will do fine.also i don't suppose anyone could recommend some plans for some tops to go with a pair of these babies??
Regards
Cubo
Please Log in or Create an account to join the conversation.
- djyves
-
- Offline
- New Member
-
- Posts: 7
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- bitzo
-
- Offline
- Platinum Member
-
- Posts: 637
- Thank you received: 1
Please Log in or Create an account to join the conversation.
- stevep409
-
- Offline
- New Member
-
- Posts: 6
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- nrpinc
-
- Offline
- Senior Member
-
- Posts: 75
- Thank you received: 0
Please Log in or Create an account to join the conversation.
- JohnnyPyro
-
- Offline
- New Member
-
- Posts: 8
- Thank you received: 0
How would the Eminence Lab 15 work in this, has a massive xmax
LAB15
SPECIFICATION
Nominal Basket Diameter 15", 381.0mm
Nominal Impedance* 6 ohms
Power Rating
Watts 600W
Music Program 1200W
Resonance 28Hz
Usable Frequency Range 20Hz-125Hz
Sensitivity*** 88.5
Magnet Weight 160 oz.
Gap Height 0.375", 9.53mm
Voice Coil Diameter 3.0", 76.2mm
THIELE & SMALL PARAMETERS
Resonant Frequency (fs) 28Hz
Download PDF Spec Sheet
Download PDF Cabinet Design
DC Resistance (Re) 4.9
Coil Inductance (Le) 3.23mH
Mechanical Q (Qms) 5.36
Electromagnetic Q (Qes) .37
Total Q (Qts) .35
Compliance Equivalent Volume (Vas) 103.61 liters / 3.7 cu.ft.
Peak Diaphragm Displacement Volume (Vd) 968cc
Mechanical Compliance of Suspension (Cms) 0.11mm/N
BL Product (BL) 26.7 T-M
Diaphram Mass inc. Airload (Mms) 308 grams
Efficiency Bandwidth Product (EBP) 75
Maximum Linear Excursion (Xmax) 11.8mm
Surface Area of Cone (Sd) 823.7 cm2
Maximum Mechanical Limit (Xlim) 22mm
Please Log in or Create an account to join the conversation.