Cubo 15

More
1 year 11 months ago #25033 by Buje
Replied by Buje on topic Cubo 15
Thank you, I have 4 Ev 15 dl 400, to test, the location, front to front, do you need any modification for this?

Please Log in or Create an account to join the conversation.

More
1 year 11 months ago #25036 by Cubo15
Replied by Cubo15 on topic Cubo 15
That depends on the clearance in front of the drivers and the excursion they make. To make sure that the accordion surrounds of the two drivers can not touch each other you might want to use a spacer ring between the drivers. I.e. an 18 mm MDF ring between the drivers doesn't hurt the outcome but might not be needed.

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #25052 by Tacatomon
Replied by Tacatomon on topic Cubo 15
How would the FaitalPro 12HP1030 perform in the Cube 15 Extra Extended?

www.loudspeakerdatabase.com/Faital/12HP1030#4%CE%A9

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #25053 by Cubo15
Replied by Cubo15 on topic Cubo 15
Do you want to use a 12" driver in Cubo 15, or do you mean the 15HP1030 instead?

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #25054 by Tacatomon
Replied by Tacatomon on topic Cubo 15
Yes, I'm curious about the performance of the 12" in the Cubo 15 Extra Extended because it has a lot more excursion. Also, I have a 15PS100-8 to test out the box.
With a removable circular baffle for the 12" to fit the and seal the 15" box opening.

Please Log in or Create an account to join the conversation.

More
1 year 5 months ago #25055 by Cubo15
Replied by Cubo15 on topic Cubo 15
It's not going to do great, do to its very low Vas (even compared to other 12" drivers). Its Vas is low, especially for use in a 15" enclosure, causing a large dip between 60 - 100 Hz. The PS100 will not have that problem (as its Vas is 3.5 times greater).

Please Log in or Create an account to join the conversation.

More
1 month 2 weeks ago #25087 by Lofobia
Replied by Lofobia on topic Cubo 15
Is there a cheat sheet for setup hornresp for simulate cubo 15 extended?
I need to simulate some drivers :)

Please Log in or Create an account to join the conversation.

More
1 month 1 week ago #25090 by Cubo15
Replied by Cubo15 on topic Cubo 15
A quick start: 555, 1500 and 2000 cm2, plus 20 and 65 cm. The Extended part has 30 cm axial length IIRC.

Please Log in or Create an account to join the conversation.

More
4 weeks 1 day ago #25093 by Lofobia
Replied by Lofobia on topic Cubo 15
Can you please show a pic with the settings in hornresp? As a hornresp newbie i din´t quite understand your post..

Please Log in or Create an account to join the conversation.

More
2 weeks 3 days ago #25095 by Cubo15
Replied by Cubo15 on topic Cubo 15
I don't have HR installed, if you learn Hornresp then the numbers will make sense. I would go about it this way: i.imgur.com/2JY1eQ8.png and simulate it as a rear loaded horn (or TH), with a rear chamber of 55555 cm^3.

There are guides/ kickstarts on HR on the web, plus on diyaudio.com/forums I've seen Cubo HR inputs in the past.

Please Log in or Create an account to join the conversation.

Time to create page: 0.826 seconds
Powered by Kunena Forum